All of our copper range hoods are handcrafted in Indiana, USA, and almost all are made from 48 oz solid copper. Each copper range hood comes with a choice of copper patina finish, as well as the options of straps, rivets, hand hammering & of course an insert & blower unit.

	CCR6 Copper Range Hood
	This copper range hood was made for a designer in Louisiana for an outdoor kitchen. It is 48” square at the bottom and 72” tall. The main body is hammered in a Medium Brown patina, the straps, and trim has a Dark Brown patina, and the rivets were cleaned to make them shine. It was made with 48 oz. pure American copper. Please call or email for any questions or ideas you may have.

CCR6A Copper Range Hood

A client wanted a down sized wall mount rangehood like the picture above. We can turn almost any of our hoods into an Island or Wall mount rangehood. Hood pictured is 40” wide, 36” tall and 20” deep in a Hammered Medium Brown patina. We used ¼” solid copper rivets to attach the trim, (also can be done using clavos). It is made with 48oz. pure American copper. Please contact us with any questions or quotes.

CCR7 Copper Range Hood

This copper range hood is more for a mission style kitchen, very decorative in its straight lines. It is 42” wide, 20” deep and 36” tall. This was made for a local Indiana client; it is smooth copper in a Medium Brown patina. It was made with 48 oz. pure American copper, no lead, tin or arsenic, like you will find in unregulated foreign copper products. Please contact us with any questions and custom quotes.

CCR7A Copper Rangehood

Similar to our CCR7 design, this revision shows customers they have the options of a different strap patina color than the body of the rangehood. The body of this copper rangehood is a smooth finish with a light/medium patina, and the straps are medieval hammered with a dark patina. The dark patina and medieval hammered straps give this copper rangehood a rustic old wood chest type look, where the straps appear like wrought iron straps. Choose any straps, rivets, colors, finishes, etc.

	CCR8 Copper Range Hood
	This hood is a vent-less style, where the client had no option to run a vent out the wall or out the roof. We can do this with about any style of hood. It is 48” wide, 24” deep and 40” tall. It was made out of 48 oz. pure American copper. The top is smooth, the bottom is hammered and it has a Light Brown patina. Please contact Circle City Copperworks with any questions.

CCR9 Copper Range Hood

This hood’s picture was taken during fabrication before final finishing and patina. This one was entirely our customer’s design. It is 40” wide, 20” deep and is 48” tall. It was made using 48 oz. pure American copper. No lead, tin, or arsenic content is contained, like you will find in unregulated foreign copper products. Please contact Circle City Copperworks with any questions or to obtain a quote for custom fabrication.

	CCR10 Copper Range Hood
	This range hood is pictured in a flamed patina. It was made using 48 oz. pure American copper. It is about 36” wide, 20” front to back and 36” tall. It was done for a client here in Southern Indiana. We really loved the way the customer decided to display our range hood. Please contact Circle City Copperworks with any questions or to obtain a quote for custom fabrication.

CCR11 Contemporary Copper Range Hood

This modern copper range hood was completed for a client in the Eagle Creek area of Indianapolis. You will also see in our custom section a copper fireplace surround that matches the range hood. It is a smooth style with straight lines that fits perfectly into this high end kitchen. Custom sizes can be fabricated to match your kitchen. No lead, tin, or arsenic content like found in unregulated foreign copper products.

	CCR12 Copper Range Hood
	This copper hood is the start of our lower priced range hoods that are made using 32 oz. pure American copper. This one is a lot like the CCR8 in shape, but with that range hood being vent less we had to use a heavier gauge copper so it was quiet when the blower is on. This is a smaller size hood being only 30” wide, 19” deep and 32” tall. Please give us a call for custom sizing and options.

CCR14 Small Copper Range Hood

This is a smaller sized rangehood designed for a 30” cook top. It is 30” wide, 20” deep and 36” tall in a smooth Reddish Brown patina. Our customer wanted a varied patina, so we worked some of the patina off and let it sit overnight before waxing it. It was made out of 32 oz. pure American copper. We are a custom shop that can accommodate any size opening you have, to fit a wonderful copper piece in your home.

CCR15 Copper Range Hood with Custom Glass Inserts

This is a new copper product line that we are developing, in collaboration with a local custom glass designer named Laura. She can design custom color glass inserts to fit just about any copper range hood. Let us know if you are interested in this unique concept and we can have Laura design a custom glass insert for your range hood. The shown installation is displayed at Kilpatrick Traditions showroom in Carmel, IN, across the street from the Indiana Design Center. Click for glass closeup.

CCR16 Copper Range Hood

This was a very difficult range hood to pull off. It was made with 32 oz. copper and has a copper frame behind it to help hold the shape. It follows the shape of the cultured marble underneath it and slopes back at an angle also. If you look at the top you will also notice that the ceiling is arched. Please contact Circle City Copperworks with any questions or to obtain a quote for custom fabrication at 317-284-0687.

	CCR17 Copper Range Hood
	We made this hammered hood in a Medium Brown patina; it was made out of 48oz. pure American copper. The rivets on the straps were patinaed by us, also made out of copper. We can do this with lighter or darker straps. Remember we do not charge for patina. No lead, tin, or arsenic content is contained, like you will find in unregulated foreign copper products. Please contact us to obtain a quote.

Everything Circle City Copperworks fabricates is custom and hand-made here in Indianapolis, Indiana from pure American copper. These pictures are provided to give you an idea of what we can fabricate. Design anything you want using these as ideas, or use your own creativity to make a sketch to send to us. We can change our products around using different design elements from any of our products. Call us at 317-284-0687 with your ideas. You can either email or fax us your sketches at 317-284-0688. We will get back to you promptly and will walk you through the whole process of making your design become real.