Flat or cone shaped copper piling caps are available in all sizes to order. Normal piling caps sizes include 6 inch, 8 inch, 10 inch and 12 inch in diameter or width. Deep well caps have 2” sides and shallow well caps have 1” sides. Any size in-between and up to 16”, is possible. These easy to install piling caps are an excellent, inexpensive way to protect costly pilings from internal rot. Each one is hand spun using 20 oz. copper, .034 thick, to insure that you're installing the finest cap available. Mounting is done by simply drilling holes and nailing with copper nails or using brass screws. If using a concrete piling they can be siliconed on. Add life to your wood pilings; finish your installation with a touch of class.
Piling or pile caps are specifically designed to extend the life of dock and mooring piles. Copper piling caps can be also used to protect fence caps, decking posts, wooden garden structures, or any other wood that is exposed to the weather. A beautiful hammered texture copper cap with antique finish can significantly enhance your decks appearence.
Not pictured: Circle City Copperworks can fabricate a deep flat cap with a 1" flange as well.
 |
Deep Well Cone Copper Piling Caps
|
| Photo shows a 10” diameter piling cap with the standard 2” sides. As with any Circle City Copperworks product, our copper piling caps are handmade. For custom sizing outside of the dimensions listed, please call for quote. We use a wood tooling that can be adjusted in size down to the 1/8” for a replacement charge for the tooling (usually $75). This is to insure a tight fit on wood piles; no two are the same size. | |
| Typical Pricing Range: 6" to 12" = $25 to $90 (Call for special pricing on large orders!) | |
 |
Shallow Cone Copper Piling Caps
|
| This is a picture of a 10” diameter piling cap with the standard 1” sides. As with any Circle City Copperworks product, our shallow well cone copper piling caps are handmade. For custom sizing outside of the dimensions listed, please call for quote. We use a wood tooling that can be adjusted in size down to the 1/8” for a replacement charge for the tooling (usually $75). This is to insure a tight fit on wood piles. | |
| Typical Pricing Range: 6" to 12" = $25 to $90 (Call for special pricing on large orders!) | |
 |
Flat Round Deep Copper Piling Caps
|
| This is a picture of a 12” diameter piling cap with the standard 2” sides. As with the cone caps above we can make this in a shallow version with a 1" rim. For custom sizing outside of the dimensions listed, please call for quote. We use a wood tooling that can be adjusted in size down to the 1/8” for a replacement charge for the tooling (usually $75). This is to insure a tight fit on wood piles. | |
| Typical Pricing Range: 6" to 12" = $25 to $90 (Call for special pricing on large orders!) | |
 |
Aluminum Piling Caps
|
| We can also make any of the above piling caps in aluminum. The picture shows a hand-turned deep well cone aluminum piling cap. For custom sizing outside of the dimensions listed, please call for quote. We use a wood tooling that can be adjusted in size down to the 1/8”, for a small replacement charge, for the tooling (usually $75). This is to insure a tight fit on wood piles; no two are the same size. | |
| Typical Pricing Range: 6" to 12" = $25 to $50 (Call for special pricing on large orders!) | |
| Everything Circle City Copperworks fabricates is custom and hand-made here in Indianapolis, Indiana from pure American copper. These pictures are provided to give you an idea of what we can fabricate. Design anything you want using these as ideas, or use your own creativity to make a sketch to send to us. We can change our products around using different design elements from any of our products. Call us at 317-284-0687 with your ideas. You can either email or fax us your sketches at 317-284-0688. We will get back to you promptly and will walk you through the whole process of making your design become real. |
