Copper countertops and bar tops offer warm natural beauty to your decor. Circle City Copperworks can integrate copper prep sinks or even full size copper kitchen sinks into your copper countertops. We craft all of our copper counters from 48 ounce copper, which are about .070" thick and can stand up to everyday household wear. We can get 48 ounce copper sheets in 48" width allowing for seamless copper island surfaces. Make sure when you are comparing other copper companies, that this is what thickness they are using.

Click to View Our Website Finish and Surface Chart

Circle City Copperworks fabricates copper countertops as complete units. When you receive one of our countertops, all you will need to do is fasten it to your cabinet or table, no further work is required. We build a wood substrate and wrap it with the copper down the sides and slightly underneath so that only copper is visible. We then weld, grind, and sand all edges and/or seams to make it one complete solid unit. We then mechanically attach the substrate to the copper from underneath. We do not use any types of glues or epoxies because none of them are recommended to adhere copper and will fail over time. Our countertops are fully attached and solid for a life time, unlike others that glue or fasten their tops which will eventually bubble or pucker over time. We have found this out overtime for ourselves. All of our standard options as far as hammer and/or patina finishes are available, like all other copper products that we make.

Copper as a countertop surface is for those owners who will accept that this surface will evolve with time. Your copper counter will age with use and establish a deeper, solid color over the surface. This change is part of the charm of a copper countertop. Upkeep will require applying a food grade wax to the surface of your copper counter. Every 6 months to year you should reapply a wax coating to maintain the patina and create a barrier against water and other liquids. The time period between reapplication can be extended if current maintenance is proving to be adequate. You only need to clean the countertop with hot water and dish soap or mild hand soap. No harsh chemicals needed. Various edge profiles can change the look and design of copper countertops. Please view our “Edge Profiles” link to see some options. If you have other ideas in mind, sketch something up and send it to us to see if this is a possible option for your countertop edge.

Zionsville Installed Copper Countertop

This countertop was installed in Zionsville, Indiana. The front edge turns straight, and then has a beautiful radius detail in the center. All Copper Countertops are manufactured using 48 oz. pure American copper. This picture is of a hammered countertop. It has a flamed patina with a medium brown over the top that our customer chose to help tone down the yellow that you get when you do a flamed patina.

	Home-O-Rama Copper Countertop
	This is a copper bar top we created for a home show in Indianapolis. It is hammered copper with a medium brown patina. We donated this piece to one of our premier designers, to add a little something different to the dark colored bar they were installing. It really made the copper stand out. It was made out of 48 oz. pure American copper. Please call us or send a drawing for all pricing.

	Smooth Copper Countertop
	This smooth countertop is pictured in a light brown patina. This countertop required a template to match in order to make sure it was a tight fit between the wood columns. Just enough room was left for it to slide in without gouging the wood. This countertop is 18” wide and 9’ long. Please call, fax or email Circle City Copperworks to discuss the pricing and options available for our countertops.

	Custom Shaped Copper Countertop
	We made this to follow an exact design that our customer desired. It is pictured in a light brown patina and is hammered. It is 2’ wide to the outside of the arches and is approximately 8’ long. This was shipped out of town, and we were told that it was easy to install like most of our countertops. We can ship anywhere in the country without any damage or hassle, and another customer was happy.

Double Sink Kitchen Copper Countertop

This was fabricated for a local builder/designer here in Indianapolis. He came to us to help beautify this kitchen with a very big and tight fitting copper countertop. A template was needed to make sure it fit tight in between the brick columns. It has two Traditional Style sinks integrated and is hammered with a light brown patina. It is 42” wide and 9’ long. Click Here for outline of this kitchen by Thomas J Pearson.

	Corner Copper Countertop
	We can shape a countertop to any design concepts including corners as depicted. Any size is possible. All of our Copper Countertops are manufactured using 48 oz. pure American copper and are installed over a hard substrate surface. Please call for pricing and options available for our countertops. No lead, tin, or arsenic content is contained, like you will find in foreign copper products.

Bathroom Copper Countertop

This is a special shaped vanity top. It was made to perfectly match the shape of the cabinet under it. We can cut any size opening to fit whatever style of sink you choose to install. This is pictured in a hammered copper with a light brown patina. Notice the backsplash; we can do this on all countertops. Please call, fax or email Circle City Copperworks to discuss the pricing and options available for our countertops.

	Traditional Style Integrated Copper Countertop
	Our hammered designs are very popular for that special touch, along with the nice rounded corners. This is pictured in a medium brown patina. The Traditional style sink is 10” deep and is welded directly to the copper top to have a seamless appearance. The top is 6’ long and 4’ wide. Please give us a call, fax or email to get started on your own custom design.

Hand Hammered Spun Sink Copper Vanity Top

This is a beautiful copper vanity top with copper filigree all the way around the edges. This top is hammered with a medium brown patina and was shipped to California. The sink is a spun copper sink that was hammered by hand and welded into the top for a seamless look. We can also pre-drill for all types of faucets. Please call, fax or email us to discuss the pricing and options available for our countertops.

	Signature Series Sink Integrated Island Copper Countertop
	This copper counter top graces Martha’s Vineyard in Maryland. It is a very large island top measuring 6’ wide by 7’ long. Because of its large size, this countertop does have a welded seam, although you can’t notice it. We don’t do butt seams, we build most of ours as one piece so that they do not come apart in the future. This is pictured in bare hammered copper, with no patina applied.

Clavos Copper Countertop

Here we created a Medieval hammered top with ornate clavos spaced around the top. It is pictured in a medium brown patina with pyramid shaped antique copper clavos. It is a simple design that the customer wanted for a bar in their basement. We have many designs and colors of clavos we can get to dress up any of our products. Please call for pricing. No lead, tin, or arsenic content is contained, like you will find in unregulated foreign copper products.

Flamed Copper Countertop

We fabricated this for customer in Illinois. We had tight tolerances on this, since there is a pass through opening into the living room. They also bought the Outdoor Fireplace Cap on the custom copper projects page. Picture shows one of our Signature Series drop in farmhouse sinks. We notched it to fit around over the edge of the countertop. This flame patina leans more towards the dark oranges and reds.

Hammered Copper Countertop With A Drink Rail

This countertop was created for a client in Wausau, Wisconsin. It was for his personal house bar. This was taken before we did the patina and has a regular Hammered finish. You can see in the picture the seams where we welded it together. It is 14’ long, 8’ on the long leg and 5’ on the short leg. The drink rail was done in a separate piece and attached from the underside. Please give us a call for pricing or with any questions.

	Hammered Copper Countertop With Stove Top
	This copper countertop is a picture provided by one of our clients who was extremely happy with the copper countertop that we custom made for them. The photo shows the rounded corners we can provide. Our customer also had us cut out the area to fit their stove top. We love receiving pictures taken from our customers after our custom copper products are installed!

Circle City Copperworks will add a classic look to your kitchen after installing our custom made copper counter top. Above, you can see from our portfolio, the different types of copper countertops, each seen are custom made by the finest standards. More home owners realize that copper countertops are both beautiful and functional in any kitchen. New home owners install custom copper counter tops to accentuate their kitchen's beauty, to add character to a room by installing a copper item. Copper counter tops add class to any gourmet kitchen when you select from our custom and pre-designed copper counters. Choose today to remodel your kitchen with one of our copper counter tops!

Everything Circle City Copperworks fabricates is custom and hand-made here in Indianapolis, Indiana from pure American copper. These pictures are provided to give you an idea of what we can fabricate. Design anything you want using these as ideas, or use your own creativity to make a sketch to send to us. We can change our products around using different design elements from any of our products. Call us at 317-284-0687 with your ideas. You can either email or fax us your sketches at 317-284-0688. We will get back to you promptly and will walk you through the whole process of making your design become real.